Airgas Model C444D660 Supelcoat™ Coated Stainless Steel High Purity Single Stage Pressure Regulator With 1/4" FNPT Connection And Threadless Seat Two Stage These regulators are typically used

These regulators are typically used in conjunction with other high-pressure regulators or on house-line systems that limit inlet pressure to 250 psig (except on model N570K the inlet pressure limit is 10 psig)

Round construction and elevated bottom encourage circulation of air around the can to disperse heat and reduce moisture buildup and rusting

A diaphragm packless outlet valve with a 1/4" compression fitting is provided for flow control and to maintain system purity

two-stage regulators is recommended for non-corrosive analytical and process applications where precise pressure control required

Note: A Cross-Purge Assembly must be used in conjunction with these models in order to ensure effective purging of hazardous gas traces during cylinder change out

Airgas Model C444D660 Supelcoat™ Coated Stainless Steel High Purity Single Stage Pressure Regulator With 1/4" FNPT Connection And Threadless Seat Two Stage These regulators are typically usedThese 316 stainless steel single stage high purity regulators are recommended for non corrosive analytical, mildly corrosive and process applications where precise flow control is not critical. A specially designed, convoluted Hastelloy C 22 diaphragm provides good regulating performance and maximum purity integrity without the need for a soft seal, which often can be a source of contamination. Each regulator is capable of withstanding an internal